Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
  • SECTION 6C3-3 - SERVICE OPERATIONS - GEN III V8 ENGINE
    • 1. GENERAL DESCRIPTION
      • 1.1 WHAT THIS SECTION CONTAINS
      • 1.2 SERVICE PRECAUTIONS
    • 2. ELECTRONIC COMPONENTS
      • 2.1 POWERTRAIN CONTROL MODULE (PCM)
        • PCM REPLACEMENT
        • REMOVE
        • REINSTALL
        • PCM SERVICE PROGRAMMING
        • PCM/PIM/BCM SECURITY LINK
        • IDLE LEARN PROCEDURE
        • FUNCTIONAL CHECK
      • 2.2 POWERTRAIN INTERFACE MODULE (PIM)
        • PIM REPLACEMENT
        • REMOVE
        • REINSTALL
        • PCM/PIM/BCM SECURITY LINK
        • FUNCTIONAL CHECK
      • 2.3 ENGINE COOLANT TEMPERATURE (ECT) SENSOR
        • REMOVE
        • REINSTALL
      • 2.4 ENGINE COOLANT LEVEL SWITCH
      • 2.5 INTAKE AIR TEMPERATURE (IAT) SENSOR
        • REMOVE
        • REINSTALL
      • 2.6 MASS AIR FLOW (MAF) SENSOR
        • REMOVE
        • REINSTALL
      • 2.7 MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR
        • REMOVE
        • REINSTALL
      • 2.8 HEATED OXYGEN SENSORS (HO2S)
        • IMPORTANT SERVICE NOTES
        • REMOVE
        • REINSTALL
      • 2.9 THROTTLE POSITION (TP) SENSOR
        • REMOVE
        • REINSTALL
      • 2.10 VEHICLE SPEED SENSOR
        • REMOVE
        • REINSTALL
      • 2.11 IDLE AIR CONTROL VALVE
        • REMOVE
        • REINSTALL
      • 2.12 CAMSHAFT POSITION (CMP) SENSOR
        • REMOVE
        • REINSTALL
    • 3. FUEL SYSTEM
      • 3.1 THROTTLE CONTROL CABLES – VEHICLES WITH TCS
        • REMOVE
        • REINSTALL
      • 3.2 THROTTLE CONTROL CABLE – VEHICLES WITHOUT TCS
        • REMOVE
        • REINSTALL
      • 3.3 THROTTLE RELAXER - VEHICLES WITH TCS
        • REMOVE
        • REINSTALL
      • 3.4 THROTTLE CABLE ADJUSTMENT – ALL
      • 3.5 THROTTLE BODY
        • REMOVE
        • REINSTALL
      • 3.6 FUEL PUMP RELAY
        • REMOVE
        • REINSTALL
      • 3.7 FUEL PRESSURE RELIEF PROCEDURE
      • 3.8 FUEL GAUGE INSTALLATION PROCEDURE
      • 3.9 QUICK CONNECT FITTINGS (METAL COLLAR)
        • REMOVE
        • REINSTALL
      • 3.10 QUICK CONNECT FITTINGS (PLASTIC COLLAR)
        • REMOVE
        • REINSTALL
      • 3.11 FUEL FILTER
        • REMOVE
        • REINSTALL
      • 3.12 MODULAR FUEL SENDER ASSEMBLY
      • 3.13 FUEL PULSE DAMPENER
        • REMOVE
        • REINSTALL
      • 3.14 FUEL HOSE/ PIPES (ENGINE COMPARTMENT)
        • REMOVE
        • REINSTALL
      • 3.15 FUEL HOSE/PIPES (REAR PIPES)
        • REMOVE
        • REINSTALL
      • 3.16 FUEL SYSTEM CLEANING
      • 3.17 FUEL PRESSURE CONNECTION (SCHRADER VALVE)
        • REMOVE
        • REINSTALL
      • 3.18 FUEL RAIL ASSEMBLY
        • REMOVE
        • REINSTALL
      • 3.19 FUEL INJECTOR
        • REMOVE
        • REINSTALL
      • 3.20 FUEL SYSTEM PRESSURE TEST
      • 3.21 FUEL SYSTEM LEAK TEST
      • 3.22 THROTTLE PEDAL ASSEMBLY
    • 4. IGNITION SYSTEM
      • 4.1 IGNITION COIL/MODULE
        • REMOVE
        • REINSTALL
      • 4.2 CRANKSHAFT POSITION (CKP) SENSOR
        • REMOVE
        • REINSTALL
      • 4.3 KNOCK SENSORS
        • REMOVE
        • REINSTALL
      • 4.4 SPARK PLUG LEAD/S
        • REMOVE
        • INSPECT
        • REINSTALL
      • 4.5 SPARK PLUGS
        • REMOVE
        • CLEAN, INSPECT AND ADJUST
        • REINSTALL
        • SPARK PLUG DIAGNOSIS
        • ANALYSIS OF SPARK PLUG CONDITION
    • 5. MISCELLANEOUS SYSTEMS
      • 5.1 EVAPORATIVE EMISSION CONTROL SYSTEM (EECS) CANISTER
      • 5.2 EECS CANISTER PURGE SOLENOID VALVE
        • REMOVE
        • REINSTALL
        • EVAPORATIVE SYSTEM CLEANING
      • 5.3 A/C REFRIGERANT PRESSURE SENSOR
        • REMOVE
        • REINSTALL
      • 5.4 OIL PRESSURE SENSOR
        • REMOVE
        • REINSTALL
      • 5.5 AIR CLEANER ASSEMBLY
        • REMOVE
        • REINSTALL
      • 5.6 REVERSE INHIBIT SOLENOID (MANUAL TRANSMISSION)
      • 5.7 AUTOMATIC TRANSMISSION
Made by Mibble ♥